STAAD.Pro ADVANCED

Product: STAAD.Pro Advanced | Generation: CONNECT Edition
Course_Flyer_Advanced
Course Content
  1. Getting Started
  2. Configuration
  3. Help
  4. Design Codes Available
  5. Analytical Modelling
  6. Creating Geometry (Node, Beam, Plate, Solid)
  7. Structure Wizard
  8. Assign the properties (Create User Table)
  9. Assign Material (Create Material properties)
  10. Assign Specification
  11. Assign Support
  12. Utilities available- Group Command
  1. Assign Loads
  2. Load Definition
  3. Reference Load Definition
  4. Vehicle/ Moving Load
  5. Define Seismic Load (Static Seismic & Dynamic Response Spectrum as per IS1893)
  6. Define Wind Load (IS 875 Part III)
  7. Create Load Combination
  8. Assign Load Envelope (Serviceability & Strength)
  9. Assign Load List
  1. Types of analysis available in STAAD
  2. P-Delta Analysis
  3. Checks required before analysis
  4. Analysis commands
  5. Pre-Analysis commands
  6. Post- analysis commands
  7. Miscellaneous commands
  8. Errors/Warning and reasons for the same
  9. Manual Checks
  10. Torsional irregularity checks as per IS1893
  1. Concrete Design Parameters as per IS456/ IS13920: 2016
  2. Concrete Building Design (Practical Example)
  3. Manual Check for Seismic Coefficient Method
  4. Advanced Concrete Design/RCDC
  5. Design of Slab, Beam, Column, Footing, Pile Cap in RCDC
  6. Creating RCC drawings / Quantities and exporting to CAD/ XLS
  1. Steel Design Parameters as per IS 800 LSM/WSM
  2. Optimize /Take off command
  3. Steel Structure Design Example of Truss Structure
  4. Steel Auto-Drafter (Introduction)
  5. Connection design (Introduction)
Other trainings

STAAD.Pro Basic

STAAD.Pro Intermediate