STAAD.Pro Basic

Product: STAAD.Pro Advanced | Generation: CONNECT Edition
Course_Flyer_Basic
Course Content
  1. Getting Started
  2. Configuration
  3. Help
  4. Design Codes Available
  5. Analytical Modelling
  6. Creating Geometry (Node, Beam, Plate, Solid)
  7. Structure Wizard
  8. Assign the properties (Create User Table)
  9. Assign Material (Create Material properties)
  10. Assign Specification
  11. Assign Support
  12. Utilities available- Group Command
  1. Assign Loads
  2. Load Definition
  3. Reference Load Definition
  4. Define Seismic Load (Static Seismic as per IS1893)
  5. Define Wind Load (IS 875 Part III)
  6. Create Load Combination
  7. Assign Load Envelope (Serviceability & Strength)
  8. Assign Load List
  1. Types of Analysis available in STAAD
  2. Checks required before analysis
  3. Analysis commands
  4. Pre-Analysis commands
  5. Post-Analysis commands
  6. Miscellaneous commands
  7. Errors/Warning and reasons for the same
  8. Manual checks
  1. Concrete Design Parameters as per IS456/ IS13920: 2016
  2. Concrete Building Design (Practical Example)
  1. Steel Design Parameters as per IS 800 LSM/WSM
  2. Optimize /Take off command
  3. Steel Structure Design Example of Truss Structure
Other trainings

STAAD.Pro Intermediate

STAAD.Pro Advanced